top of page

This heavy duty Trackbar mount will replace your factory mount and allow for a 2.5 inch-3.5 inch Stretch forward of the factory position. Perfect for use with our TJ 1 Ton Axle Swap for added clearance.

  • TJ/ LJ Trackbar Mount
  • Designed to curve the factory frame and align the track bar position
  • Locates off a factory frame hole for easy positioning
  • Tracbar bracket can slide on frame plate forward or backward until you find the best location with your set up
  • 3 hole locations for finding the right steering/track bar geometry. 1.3 inch in between each hole
  • If using the top two holes, you can cut off the bottom of the bracket for higher clearance
  • 1.75 inch mounting width to fit our 7/8 inch X 3/4 inch Rod Ends With High Misalignment Spacers. (Will Not work with a Factory Replacement Joint)
  • CNC laser cut and CNC bent from 1/4 inch steel for precision fit and heavy duty use
  • Sold as kit


  • This kit requires general welding and fabrication skills including welding to the cast center section. Welding should only be done by a competent welder. Artec Industries implies no guarantees or warranties and is Not liable for improper installation.
  • Some grinding and fitment may be required when installing this kit. Every axle varies slightly and some fabrication may be required.

Jeep TJ Trackbar Mount 97-06 Wrangler TJ 2.5 3.5 Inch Stretch Artec Industries

SKU: TJ2001
    bottom of page